HOBOnet Water Level Sensor Interface
- In stock, only 2 left
- Available to order
Specifications
Wireless Mote |
|
Operating Temperature Range |
-25° to 60°C (-13° to 140°F) with rechargeable batteries; -40° to 70°C (-40° to 158°F) with lithium batteries |
Radio Power |
12.6 mW (+11 dBm) non-adjustable |
Transmission Range |
Reliable connection to 457.2 m (1,500 ft.) line of sight at 1.8 m (6 ft.) high; Reliable connection to 609.6 m (2,000 ft.) line of sight at 3 m (10 ft.) high |
Wireless Data Standard |
IEEE 802.15.4 |
Radio Operating Frequencies |
RXW-WL-900: 904–924 MHz; RXW-WL-868: 866.5 MHz; RXW-WL-921: 921 MHz; RXW-WL-922: 916–924 MHz |
Modulation Employed |
OQPSK (Offset Quadrature Phase Shift Keying) |
Data Rate |
Up to 250 kbps, non-adjustable |
Duty Cycle |
<1% |
Maximum Number of Motes |
Up to 50 wireless sensors or 336 data channels per one HOBO RX station |
Logging Rate |
1 minute to 18 hours |
Number of Data Channels |
4 (Water Level, Differential Pressure, Water Temperature, Barometric Pressure) |
Battery Type/ Power Source |
Two AA 1.2V rechargeable NiMH batteries, powered by built-in solar panel or two AA 1.5V non-rechargeable lithium batteries for operating conditions of -40 to 70°C (-40 to 158°F) |
Battery Life |
With NiMH batteries: Typical 3–5 years when used in the temperature range -20° to 40°C (-4°F to 104°F) and positioned toward the sun (see Mounting and Positioning the Mote); using the batteries outside this range reduces the battery life.; With non-rechargeable lithium batteries: 1 year, typical use. |
Memory |
16 MB |
Dimensions |
Interface Connector Diameter: 25.4 mm (1 inch); Cable length: 1.83 m (6 ft); Mote: 16.2 x 8.59 x 4.14 cm (6.38 x 3.38 x 1.63 inches) |
Weight |
229 g (8.08 oz) |
Materials |
Sensor: Polycarbonate housing encasing epoxy sealed circuit board; Cable: Polyurethane; Mote: PCPBT, silicone rubber seal |
Environmental Rating |
Mote: IP67, NEMA 6 |
Pressure (Absolute) and Water Level Measurements MX2001-01-SS-S and MX2001-01-Ti-S |
|
Operation Range |
0 to 207 kPa (0 to 30 psia); approximately 0 to 9 m (0 to 30 ft) of water depth at sea level, or 0 to 12 m (0 to 40 ft) of water at 3,000 m (10,000 ft) of altitude |
Factory Calibrated Range |
69 to 207 kPa (10 to 30 psia), 0° to 40°C (32° to 104°F) |
Burst Pressure |
310 kPa (45 psia) or 18 m (60 ft) depth |
Water Level Accuracy* |
Typical error: ±0.05% FS, 0.5 cm (0.015 ft) water; Maximum error: ±0.1% FS, 1.0 cm (0.03 ft) water |
Raw Pressure Accuracy** |
±0.3% FS, 0.62 kPa (0.09 psi) maximum error |
Resolution |
<0.02 kPa (0.003 psi), 0.21 cm (0.007 ft) water |
Pressure Response Time (90%)*** |
<1 second at a stable temperature |
Pressure (Absolute) and Water Level Measurements MX2001-02-SS-S |
|
Operation Range |
0 to 400 kPa (0 to 58 psia); approximately 0 to 30.6 m (0 to 100 ft) of water depth at sea level, or 0 to 33.6 m (0 to 111 ft) of water at 3,000 m (10,000 ft) of altitude |
Factory Calibrated Range |
69 to 400 kPa (10 to 58 psia), 0° to 40°C (32° to 104°F) |
Burst Pressure |
500 kPa (72.5 psia) or 40.8 m (134 ft) depth |
Water Level Accuracy* |
Typical error: ±0.05% FS, 1.5 cm (0.05 ft) water; Maximum error: ±0.1% FS, 3.0 cm (0.1 ft) water |
Raw Pressure Accuracy** |
±0.3% FS, 1.20 kPa (0.17 psi) maximum error |
Resolution |
<0.04 kPa (0.006 psi), 0.41 cm (0.013 ft) water |
Pressure Response Time (90%)*** |
<1 second at a stable temperature |
Pressure (Absolute) and Water Level Measurements MX2001-03-SS-S |
|
Operation Range |
0 to 850 kPa (0 to 123.3 psia); approximately 0 to 76.5 m (0 to 251 ft) of water depth at sea level, or 0 to 79.5 m (0 to 262 ft) of water at 3,000 m (10,000 ft) of altitude |
Factory Calibrated Range |
69 to 850 kPa (10 to 123.3 psia), 0° to 40°C (32° to 104°F) |
Burst Pressure |
1,200 kPa (174 psia) or 112 m (368 ft) depth |
Water Level Accuracy* |
Typical error: ±0.05% FS, 3.8 cm (0.125 ft) water; Maximum error: ±0.1% FS, 7.6 cm (0.25 ft) water |
Raw Pressure Accuracy** |
±0.3% FS, 2.55 kPa (0.37 psi) maximum error |
Resolution |
<0.085 kPa (0.012 psi), 0.87 cm (0.028 ft) water |
Pressure Response Time (90%)*** |
<1 second at a stable temperature |
Pressure (Absolute) and Water Level Measurements MX2001-04-SS-S and MX2001-04-Ti-S |
|
Operation Range |
0 to 145 kPa (0 to 21 psia); approximately 0 to 4 m (0 to 13 ft) of water depth at sea level, or 0 to 7 m (0 to 23 ft) of water at 3,000 m (10,000 ft) of altitude |
Factory Calibrated Range |
69 to 145 kPa (10 to 21 psia), 0° to 40°C (32° to 104°F) |
Burst Pressure |
310 kPa (45 psia) or 18 m (60 ft) depth |
Water Level Accuracy* |
Typical error: ±0.075% FS, 0.3 cm (0.01 ft) water; Maximum error: ±0.15% FS, 0.6 cm (0.02 ft) water |
Raw Pressure Accuracy** |
±0.3% FS, 0.43 kPa (0.063 psi) maximum error |
Resolution |
<0.014 kPa (0.002 psi), 0.14 cm (0.005 ft) water |
Pressure Response Time (90%)*** |
<1 second at a stable temperature |
Barometric Pressure (RXW-WL-xxx) |
|
Operation Range |
66 to 107 kPa (9.57 to 15.52 psia) |
Temperature Calibrated Range |
-20 to 50°C (-4 to 122°F) |
Accuracy |
±0.2 kPa (±0.029 psi) over full temperature range at fixed pressure; maximum error ±0.5% FS |
Water Level Accuracy* |
Typical error: ±0.075% FS, 0.3 cm (0.01 ft) water; Maximum error: ±0.15% FS, 0.6 cm (0.02 ft) water |
Resolution |
<0.01 kPa (0.0015 psi) |
Response Time |
<1 second at stable temperature |
Stability (Drift) |
<0.01 kPa (0.0015 psi) per year |
Temperature Measurements (All Sensor End Models MX2001-0x-SS-S and MX2001-0x-Ti-S) |
|
Operation Range |
-20° to 50°C (-4° to 122°F) |
Accuracy |
±0.44°C from 0° to 50°C (±0.79°F from 32° to 122°F) |
Resolution |
0.1°C at 25°C (0.18°F at 77°F) |
Response Time (90%) |
5 minutes in water (typical) |
Stability (Drift) |
0.1°C (0.18°F) per year |
Full details are in the datasheet and manual under Resources & Downloads.
This item is priced on application. Tell us what you need and we'll send you a quote.
Need a quick answer? Use live chat. For quotes or detailed requirements, send us the details and we'll reply by email.
Or call us on 01243 558270
Overview
The HOBOnet water level sensor interface features a pre-configured, easily deployed wireless sensor that communicates accurate, reliable water level data directly to a HOBO RX3000 or HOBO Micro RX2105/RX2106 station, the core component of the HOBOnet remote monitoring system.
HOBOnet is a cost-effective, scalable, user-friendly wireless sensor network that lets you streamline data retrieval by effortlessly monitoring multiple wells with a single cellular device. Data is accessed from anywhere, at any time, through the customizable dashboard in HOBOlink, Onset's innovative cloud software platform – eliminating the need for frequent site visits that are both time-consuming and costly. HOBOlink also sends automatic, real-time text/email notifications to alert you of any sensor or system alarms, providing the insights you need to make informed decisions, react quickly to stay ahead of issues, and ensure compliance.
Other Benefits:
- User-friendly setup process
- A proven water level sensor for accurate, reliable readings
- Rechargeable batteries and built-in solar panel eliminate downtime
- Real-time insights via customised dashboards in HOBOlink, leaving delays in the past
- No data loss due to user error, with temperature-compensated pressure readings for accurate, reliable information
- HOBOlink cloud dashboards for in-depth data analysis and smarter decision-making
- Kevlar-reinforced cable with integrated strain relief mechanism.
Key Features
Sensor Features
- Non-vented design reduces maintenance
- Durable, ceramic sensor can withstand freezing
- 3-point NIST-traceable calibration certificate
Wireless Features
- Sub-GHz wireless mesh self-healing technology for expansive coverage
- 450 to 600 meter (1,500 to 2,000 feet) wireless range and up to five hops
- Up to 50 wireless sensors or 336 data channels per one HOBO RX station
- Simple button-push to join the HOBOnet wireless network
- Onboard memory to ensure no data loss
- Powered by rechargeable AA batteries and built-in solar panel.
IMPORTANT
A complete system requires at least one HOBOnet Water Level Sensor, a direct read cable, and a HOBO RX3000 Remote Monitoring Station and HOBOnet Wireless Manager (or a HOBO Micro RX2105/RX2106 Station with an integrated HOBOnet Wireless Manager). HOBOnet Wireless Repeaters (RXW-RPTR-868 or RXW-RPTR-B-868) can be added to extend the range.
