HOBO U-DT-1 Shuttle Data Transporter
- In stock, ready to ship
- Available to order
| HOBO Product Series | U-DT (Data Shuttles) |
|---|---|
| Data Available By | Display |
Requirements:
HOBOware Pro 2.2.0 or greater; USB cable (provided)
Compatible logger with appropriate cable and/or base station
Compatibility: All U-Series loggers, HOBO Weather Stations (H21-001) and Micro Stations (H21-002 only), and HOBO Energy Logger systems; not compatible with the HOBO Waterproof Shuttle (U-DTW-1)
Firmware upgrades: Available on the Onset website as needed to provide compatibility with future supported logger models
Operating temperature: 0° to 50°C (32° to 122°F)
Storage temperature:-10° to 50°C (14° to 122°F)
Time accuracy: ± 1 minute per month at 25°C (77°F); see Plot A
Logger-to-Shuttle Transfer Speed
USB/optic: 64K in approximately 30 seconds
Serial: 512K in approximately 60 seconds
Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer
Data capacity (full loggers): 4 MB (minus 64 KB for shuttle information): enough for 504 readouts of 8K loggers, 63 readouts of 64K loggers, or 7 readouts of 512K loggers
Idle timeout: Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware or changing logger batteries (10 minutes)
Ports:
RJ-12 jack for communicating with smart sensors
Mini-B full speed USB port for communicating with host computer
Full speed USB port for communicating with U-Series loggers and base stations
High speed serial port for communicating with serial loggers
Shuttle communicates with only one device at a time
Batteries main: 2 AA alkaline batteries
Clock backup: 1 CR1225 lithium battery (3 V)
Battery life main: One year or approximately 50 complete memory fills, typical use
Clock backup: 10 years typical use (with main batteries installed)
Weight: 153 g (5.4 oz)
Dimensions: 11.0 x 6.9 x 2.7 cm (4.35 x 2.70 x 1.05 inches)
Case materials: ABS case with urethane rubber grips, polycarbonate label
The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).
HOBO U-Shuttle U-DT-1
30 cm (12 inch) serial logger cable
USB cable
This item is priced on application. Tell us what you need and we'll send you a quote.
Need a quick answer? Use live chat. For quotes or detailed requirements, send us the details and we'll reply by email.
Or call us on 01243 558270
BUYING IN BULK, OR JUST WANT SOME HELPFUL ADVICE?
Call +44 (0)1243 558270, or fill out our contact form.
This product has been discontinued by Onset and is no longer available.
A current alternative is the HOBO U-DTW-1 Waterproof Shuttle Data Transporter. Please contact us if you need help choosing.
Conveniently offload data from loggers in the field for transfer to a host computer. View readings on a 2 x 16-character display for selected data loggers, and access logger status for all loggers.
Compatible with all HOBO U-Series loggers (except the HOBO U30 Station), all UX-Series loggers (except UX120-006M), HOBO Weather Stations and Micro Stations (H21), and the HOBO Energy Logger (H22). An Optic USB Base Station is required for use with optic USB data loggers.
Key Features
- Reads out data from loggers in the field for transfer to a host computer
- Optionally relaunches the logger—synchronises the logger’s clock with the shuttle’s clock and (in most cases) sets logging to begin at the next interval
- Preserves data in nonvolatile memory, even if batteries are depleted
- Displays logger status, including memory, battery level, and sensor readings for some sensors (on some models)
- Displays its own status, including clock, memory, and battery level
- Lets you change the batteries in the field without resetting the clock
- Allows you to test individual smart sensors (does not support the TRMSA-D).
Requires HOBOware Pro software v2.2.0 or greater.
