HOBO U-DT-1 Shuttle Data Transporter
- In stock, ready to ship
- Available to order
| HOBO Product Series | U-DT (Data Shuttles) |
|---|---|
| Data Available By | Display |
Requirements:
HOBOware Pro 2.2.0 or greater; USB cable (provided)
Compatible logger with appropriate cable and/or base station
Compatibility: All U-Series loggers, HOBO Weather Stations (H21-001) and Micro Stations (H21-002 only), and HOBO Energy Logger systems; not compatible with the HOBO Waterproof Shuttle (U-DTW-1)
Firmware upgrades: Available on the Onset website as needed to provide compatibility with future supported logger models
Operating temperature: 0° to 50°C (32° to 122°F)
Storage temperature:-10° to 50°C (14° to 122°F)
Time accuracy: ± 1 minute per month at 25°C (77°F); see Plot A
Logger-to-Shuttle Transfer Speed
USB/optic: 64K in approximately 30 seconds
Serial: 512K in approximately 60 seconds
Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer
Data capacity (full loggers): 4 MB (minus 64 KB for shuttle information): enough for 504 readouts of 8K loggers, 63 readouts of 64K loggers, or 7 readouts of 512K loggers
Idle timeout: Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware or changing logger batteries (10 minutes)
Ports:
RJ-12 jack for communicating with smart sensors
Mini-B full speed USB port for communicating with host computer
Full speed USB port for communicating with U-Series loggers and base stations
High speed serial port for communicating with serial loggers
Shuttle communicates with only one device at a time
Batteries main: 2 AA alkaline batteries
Clock backup: 1 CR1225 lithium battery (3 V)
Battery life main: One year or approximately 50 complete memory fills, typical use
Clock backup: 10 years typical use (with main batteries installed)
Weight: 153 g (5.4 oz)
Dimensions: 11.0 x 6.9 x 2.7 cm (4.35 x 2.70 x 1.05 inches)
Case materials: ABS case with urethane rubber grips, polycarbonate label
The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).
HOBO U-Shuttle U-DT-1
30 cm (12 inch) serial logger cable
USB cable
This item is priced on application. Tell us what you need and we'll send you a quote.
Or call us on 01243 558270
BUYING IN BULK, OR JUST WANT SOME HELPFUL ADVICE?
Call +44 (0)1243 558270, or fill out our contact form.
This product has been discontinued by Onset and is no longer available.
A current alternative is the HOBO U-DTW-1 Waterproof Shuttle Data Transporter. Please contact us if you need help choosing.
Conveniently offload data from loggers in the field for transfer to a host computer. View readings on a 2 x 16-character display for selected data loggers, and access logger status for all loggers.
Compatible with all HOBO U-Series loggers (except the HOBO U30 Station), all UX-Series loggers (except UX120-006M), HOBO Weather Stations and Micro Stations (H21), and the HOBO Energy Logger (H22). An Optic USB Base Station is required for use with optic USB data loggers.
Key Features
- Reads out data from loggers in the field for transfer to a host computer
- Optionally relaunches the logger—synchronises the logger’s clock with the shuttle’s clock and (in most cases) sets logging to begin at the next interval
- Preserves data in nonvolatile memory, even if batteries are depleted
- Displays logger status, including memory, battery level, and sensor readings for some sensors (on some models)
- Displays its own status, including clock, memory, and battery level
- Lets you change the batteries in the field without resetting the clock
- Allows you to test individual smart sensors (does not support the TRMSA-D).
Requires HOBOware Pro software v2.2.0 or greater.