Micronics Ultraflo UF3300 Fixed Clamp-on Flow and Process Measurement Meter Range

NEW improved integral data logger option logs flow all date stamped.

Measurement Technique: Ultrasonic, cross-correlation transit time method for flow measurement.
Enclosure: The UF3300 enclosure is IP65 rated.
‘A’ Transducers: 13mm OD to 115mm OD pipes, IP54 with IP68 option.
‘B’ Transducers: 50mm OD to 2000mm OD pipes, IP54 with IP68 option.
Transducer Operating Temp:– ‘A’&‘B’ -20°C to +135°C. ‘A’&‘B’ Option Hi-Temp -20°C to +200°C.
Flow Range: 0.1m/sec to 20m/sec bi-directional.
Turn Down Ratio: 100:1
Accuracy: +/- 0.5% to +/- 3% depending on pipe size for flow rate > 0.2m/s.
Data Communications: USB, supports most USB 2.0 BOM drives.
3 x Pulse Output: Pulse or Frequency. Opto-isolated MOSFET relay.
Max current: 150mA. Isolation: >100V AC/DC/ Pulse for volume flow and alarms., frequency for flow and power rate. The pulse outputs can be configured including: flow totals, loss of signal, low flow alarms.
Volumetric mode: Pulse repetition rates: up to 50 pulses/sec (depending on pulse width).
Frequency mode: Max. pulse frequency: 200Hz.
Flow at max frequency: User selectable.
4-20mA Output: 4–20mA flow proportional output; optically isolated 1500 volts, 620 ohms maximum load.
Power: 86V to 264V AC. Optional 12V a.c./d.c. 1A max.
Data Logging (dependent on model): 100,000,000 data points. Downloaded via USB to CSV file and export to Excel. Logs application details, time, date, flow rate, forward total, reverse total, flow velocity, signal quality, signal SNR, signal status.

Hardware & Operation
The UF3300 electronics are housed in a IP65 enclosure, which incorporates the display, keypad, sensor and output facility connections. Set-up of the unit is carried out by selecting the options displayed in the main menu and by following the simple instructions in any of the user selectable languages.
Signal strength, time and date, as well as flow information are all continuously displayed, keeping the user fully aware of the measurement process.

Hydronic Liquid Flow Energy Measurement
The UF3300 is a simple to use ultrasonic clamp-on flow and thermal, heat/energy meter, that uses ultrasound to measure flow rate and clamp-on PT100 temperature sensors to measure flow and return temperatures. The UF3300 measures energy rate and totalised energy. And the Heat/Energy calculation is designed to comply with EN1434 section 6.

Flow Transducers
The UF3300 range is able to work with different transducer sets depending on the unit purchased and the application. Optional high temperature sensors are also available. Sensor mounting clamps are provided with each instrument, to ensure correct mounting and reliable operation on any size pipe, in either diagonal or reflex modes.

Data Logger
100,000,000 data points. 12 named sites. Download via USB to CSV file and export to Excel. Logs application details, time, date, flow rate, forward total, reverse total, flow velocity, flow side temperature, return side temperature, temperature difference, power, total energy, signal Quality, signal SNR, signal status.