The integral bubble level is raised to the top of the housing and can be viewed without removing the redesigned snap-on sun shield, which also covers the connector. The screw-in drying cartridge is easy to remove and the replacement desiccant is supplied in convenient refill packets.
A waterproof socket is fitted for the signature yellow signal cable, which is available in a range of lengths pre-wired to the waterproof plug.
The Pyranometer does not require any power as it supplies a low voltage of 0-20mV in relation to the amount of incoming radiation. When a higher voltage level or a 4-20mA signal is required, the AMPBOX is the perfect solution.
Spectral range 200 to 3600 nm
Sensitivity 7 to 14 µV/W/m²
Response time 5 s
Zero offset A < 3 W/m²
Zero offset B < 1 W/m²
Directional error (up to 80 ° with 1000 W/m² beam) < 5 W/m²
Temperature dependence of sensitivity (-20 ºC to +50 ºC) < 0.5 %
Operating temperature range -40 °C to +80 °C
Maximum solar irradiance 4000 W/m²
Field of view 180 °