Telaire 7001 CO2 and Temperature Monitor (USA Power Adapter)

CO₂ measurement range: 0 to 4000 ppm CO₂
Temperature measurement range: 0 to +40°C (+32 to +104°F)
Operating range: 32°F to 122°F (0°C to 50°C), 0 to 95% RH, non-condensing
Display resolution: ±1 ppm
Accuracy: ±50 ppm or 5% of reading, whichever is greater
Repeatability: ±20 ppm
Temperature dependence: ±0.1% of reading per °C or ±2 ppm per °C, whichever is greater, referenced at 25°C
Pressure dependence: 0.13% of reading per mmHg (corrected via user input for elevation)
Response time: <60 seconds for 90% of step change
Warm-up time: <60 seconds at 72°F (22°C)
Calibration interval: 12 months
Battery type: Four AA batteries (not included)
Battery operation: 80 hours (alkaline)

Recording Range
When using the CABLE-CO2 and a HOBO UX120-006M, MX1100, U12, or ZW series data logger: 0 to 2500 ppm
When using the CABLE-2070 and a HOBO RX3000, H22, or U30 data logger: 0 to 4000 ppm 

External power supply specifications
AC/DC adapter (included)
Output: 6 VDC, 500mA output.
Power connector: Round barrel with 2.5mm ID , 5.5mm OD, 12mm long, center positive (+6 VDC), outer shell ground.

Note: This sensor is not designed for use with Intrinsically Safe (IS) loggers.