Loading...
Discontinued

DISCONTINUED: Conc Temp Monitoring Kit

Out of stock
SKU
UX120-014M-Kit-Concrete
Special Price £603.68 £503.07 Regular Price £635.46

BUYING IN BULK, OR JUST WANT SOME HELPFUL ADVICE?

Call +44 (0)1243 558270, click on the webchat box below, or fill out our contact form.

This concrete temperature sensors kit comprises a HOBO UX120-014M 4-Channel thermocouple data Logger, protective enclosure and 4 x Type K thermocouples (2 metres in length each). As such it is perfect for monitoring and logging the temperature of concrete at various depths and locations whilst it cures. The data logger contains onboard ambient temperature measurement in addition to the 4 thermocouple channels. The thermocouples are manufactured by Tempcon in-house and ensure a fast accurate response time.

Using HOBOware, you can easily configure the logger alarm to trip for specific high or low concrete temperatures. Or, you can set up burst logging in which the logger records data at a different interval during certain conditions.

Key Features of the Concrete Temperature Monitoring Kit

  •  4 thermocouple inputs for type J, K, T, E, R, S, B, or N thermocouple probes (we supply 4 x Type K Free of Charge!)
  •  Internal thermistor for ambient temperature & cold junction compensation
  •  22 bit resolution
  •  Logger operating range: -20° to +70°C (the thermocouple probes' working range is dependent on the type and material used)
  •  Memory: 1.9 million measurements
  •  LCD refreshes every 15 seconds
  •  Visual high & low temperature alarm thresholds
  •  User upgradable firmware
  •  4 X 2 metre Type K thermocouples
  •  Free software
  •  Free USB cable
  •  CASE-4X-2 (NEMA 4X designation, designed to offer a weather-resistant enclosure in a wet, dusty, or condensing environments for short deployments where additional protection is needed).
More Information
Explanation

 

Specifications

Thermocouple


Type Range Accuracy Resolution
J -210° to 760°C (-346° to 1,400°F) ±0.6°C (±1.08°F) ± thermocouple probe accuracy 0.03°C (0.06°F)
K -260° to 1,370°C (-436° to 2,498°F) ±0.7°C (±1.26°F) ± thermocouple probe accuracy 0.04°C (0.07°F)
T -260° to 400°C (-436° to 752°F) ±0.6°C (±1.08°F) ± thermocouple probe accuracy 0.02°C (0.03°F)
E -260° to 950°C (-436° to 1,742°F) ±0.6°C (±1.08°F) ± thermocouple probe accuracy 0.03°C at (0.05°F)
R -50° to 1,550°C (-58° to 2,822°F) ±2.2°C (±3.96°F) ± thermocouple probe accuracy 0.08°C (0.15°F)
S -50° to 1,720°C (-58° to 3,128°F) ±2.2°C (±3.96°F) ± thermocouple probe accuracy 0.08°C (0.15°F)
B 550° to 1,820°C (1,022° to 3,308°F) ±2.5°C (±4.5°F) ± thermocouple probe accuracy 0.1°C (0.18F)
N -260° to 1,300°C (-436° to 2,372°F) ±1.0°C (±1.8°F) ± thermocouple probe accuracy 0.06°C (0.11°F)

 

 

Internal 10K Thermistor (Temperature):


Plot A Time AccuracyRange: Logging: -20° to 70°C (-4° to 158°F)
Acuracy: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F), see Plot A
Resolution: 0.024°C at 25°C (0.04°F at 77°F); see Plot A
Drift: <0.1°C (0.18°F) per year

 

 

Logger


Logger Operating Range
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing); logger accuracy from 0° to 50°C (32° to 122°F)
Launch/readout: 0° to 50°C (32° to 122°F) per USB specification

Logging rate: 1 second to 18 hours, 12 minutes, 15 seconds
Logging modes: Normal, Burst or Statistics
Memory modes: Wrap when Full or Stop when Full
Start modes: Immediately, Push Button, Date & Time or Next Interval
Stop modes: When Memory Full, Push Button, or Date & Time
Restart mode: Push Button
Time Accuracy - UX120-014MTime accuracy: ±1 minute per month at 25°C (77°F), see Plot B
Battery life: 1 year, typical with logging rate of 1 minute and sampling interval of 15 seconds or greater
Battery type: Two AAA 1.5V alkaline batteries, user replaceable
Memory: 4 MB (1.6 million measurements, maximum)
Download type: USB 2.0 interface
Full memory download time: Approximately 1.5 minutes
LCD: LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size: 10.8 x 5.41 x 2.54 cm (4.25 x 2.13 x 1 in.)
Weight107.5 g (3.79 oz)
Environmental rating: IP50

Ideal For Professional
Brand Onset HOBO
Channel(s) 4
Onset Product Series UX120
Typical applications Cement Curing
Measurements Temperature

Standard delivery (Royal Mail) - £3.95 to £4.99

Available for purchases under £100. Your order should be with you within 4-5 working days.

 

Tracked delivery - £5.95 to £6.50

Our tracked delivery is either Royal Mail tracked, Parcelforce or UPS. Your order should be with you within 1-2 working days.

 

Next Day service - £9.95

Place your order before 2:30pm Monday - Friday and receive your order the next working day (excludes Saturdays, Sundays and Public holidays). Orders placed at the weekend are shipped on the next working day and usually arrive the following day. Goods shipped on a next working day service may be subject to delays by the courier which are outside of our control. Services to outlying areas may differ and take longer and enhanced services may not be available.

 

International delivery

International delivery is available for this product. The cost and delivery time depend on country.

 

Collection

You can collect from our showroom. Please call before visiting to ensure we have your order ready.

File NameLink
D305 HOBO UX120-014M data sheet.pdfDownload
Write Your Own Review
You're reviewing:DISCONTINUED: Conc Temp Monitoring Kit
Your Rating